Dryer not heating?

The heating element coil burns out and breaks the circuit, completely stopping heat production in the drum.

Likely causes · most likely first

Heating Element (279838)

Moderate DIY Part: $20–$50
Thermal Fuse

Easy DIY Part: $5–$15

A blown thermal fuse is a one-time safety device that permanently opens the heating circuit when overheating occurs.
Cycling Thermostat

Easy DIY Part: $5–$20

A failed cycling thermostat can stay open, preventing the heating element from ever energizing during the cycle.
Hi-Limit Thermostat (WP3977767)

Easy DIY Part: $5–$20

A faulty high-limit thermostat trips permanently or intermittently, cutting power to the heating element as a false overheat response.
Control Console (W10672827)

Moderate DIY Part: $80–$200

A defective control board may fail to send voltage to the heating circuit even though the motor and drum operate normally.

See the faulty part in 3D.

Tap a highlighted part to see exactly why it fails, how to verify it's the problem, and how to replace it.